Trending Now
Show HN: Full Stack Entrepreneur – A Full Stack Guide To...
The model is talking about booking her latest gig, modeling WordPress underwear in the brand latest Perfectly Fit campaign, which was shot by Lachian...
Kitchen Remodel: Part 4 – Cabinet Carcass
I made the cabinet carcass from maple veneer plywood. I made the bottom pieces first to make sure they fit in...
WORD CUP 2016
Microwave/Recycling Bin/Shredder/Tack Board/Mail Tray Cabinet – Part 1 of 3
This project started as a microwave stand, but many other functions were added....
Jelly Studio Part 4: Boxes
Jelly asked me to make two boxes for the downstairs area of his...
Wood Turned Cedar Stool
In this video, I wood turn a large piece of port orford cedar...
WRC Rally Cup
The 10 Runway Trends You’ll Be Wearing This Year
The model is talking about booking her latest gig, modeling WordPress underwear in the brand...
Making a Toy Tractor
How I made a toy Tractor inspired by the Porsche-Diesel Super Tractor. I...
Sliding Pantry Door
We wanted to make a door for our new pantry and I have...
- Advertisement -
SPORT NEWS
- Advertisement -
CYCLING TOUR
Kitchen Remodel: Part 6 – Cabinet Tops
I have made a frame for the tops of the cabinets out of 3/4 inch birch plywood. This frame will help...
Wood Turned Maple Bowl
The rough turned maple bowl that I wanted to finish next had cracked. The crack was at an angle to vertical...
Kitchen Remodel: Part 15: Breakfast Bar – Part C
I have made the drawers for the breakfast bar. The boxes for the drawers are constructed in the same manner as...
Announcing a specification for PHP
The model is talking about booking her latest gig, modeling WordPress underwear in the brand latest Perfectly Fit campaign, which was shot by Lachian...
The Rainwater Tank
I have installed of a 2500 gallon rainwater storage tank on the shop. I built a pad by digging out a...
TENNIS
Workout Routine for Big Forearms and a Crushing Grip
The model is talking about booking her latest gig, modeling WordPress underwear in the brand latest Perfectly Fit campaign, which was shot by Lachian...
- Advertisement -
Workout Routine for Big Forearms and a Crushing Grip
The model is talking about booking her latest gig, modeling WordPress underwear in the brand latest Perfectly Fit campaign, which was shot by Lachian...
- Advertisement -
LATEST ARTICLES
Transforming a Pressure Pot for Resin Casting
I attended a seminar last spring at the Oregon Wood Turning
Symposium about casting resin. One of the takeaways I got was that I needed to
find a used pressure pot to do resin...
Making A New Mallet
I have been experimenting with a new mallet idea. The idea
is to glue up a mallet from smaller pieces of wood and then carve that glue up
on the rotary 4th axis on...
Delicate Demolition
We have started working on the central room in our basement.
We would like to transform this room into a comfortable family room. The first
project is to remove a bench along the outer...
Woodturning A Spalted Maple Bowl
I have made a wood turned bowl for a charity auction for Camp More. Camp More is a week long summer camp on the Oregon coast for kids who have a stutter....
Garage Storage Drawers Part 2
I have completed the 2nd half to the basement storage system. This part of the project entailed bringing
the structure into the house and attaching it to the wall, in addition to
installing all...
Making A Kiwi Trellis
I have been working on a trellis for my parents. It is a Mother's Day gift. I just got the trellis put in place and it seems to work. The big idea...
Making the Steel Bridge
We built my son's 3rd grade Steel Bridge project on the CNC router. First we made drawings of the Steel Bridge from photographs. With these drawings, we cut out...
Making A Woodturning Steady Rest
I have made a steady rest for my lathe to help in finishing both ends of the mallets I have been working on. I made a steady rest a few years ago...
Workholding Devices on the CNC
In this project, I made two workholding devices for the CNC wood router table. The first workholding device is a clamp that holds a piece of wood vertical so I can...
Motor Mount and Belt Cover for the Surface Sanding Machine
In this project, I lift the drum sander’s motor up and move it closer to the shaft of the drum. In doing this, I shorten the belts between the motor and...
MOST COMMENTED
Kitchen Remodel: Part 10 – Sink
I built the cabinet for the sink wider than necessary thinking I would need some adjustability in the placement of the sink....
