The kitchen windows were in need of repair. One of the two windows had a crack running through the glass and the glazing was falling out of both windows. I removed both window frames and moved them to the shop to work on. I removed the glazing and the glass. I striped the paint from the inside of the frame with a heat gun. To put the new glass in, I first laid down a small bead of glazing on the frame. I set the glass into this glazing and pushed it into place. Next, I pushed glazing points into place to hold the glass in place. I used three on a side. Then I ran glazing over the glazing points to form the outside of the window. I reinstalled the window frames and added new hardware. I filmed this using only natural light.