Wooden Recycling Bin
We have been in need of a box for our recycling drawer. I took inspiration from the paper bags that we have been using and made a box from very thin...
Microwave/Recycling Bin/Shredder/Mail Tray Cabinet – Part 3 of 3
In this final video, I put everything together in the laundry room. I made the shelf to hold the microwave and then discovered that the microwave did not fit thought the...
Microwave/Recycling Bin/Shredder/Mail Tray Cabinet – Part 2 of 3
In this video, I build the main cabinet of the microwave stand. It is made from ¾ inch birch plywood. Three sides of the cabinet are solid sheets with...
Microwave/Recycling Bin/Shredder/Tack Board/Mail Tray Cabinet – Part 1 of 3
This project started as a microwave stand, but many other functions were added. It is now a microwave stand, recycling bin, shredder, mail tray, and tack board. In this...
Kitchen Remodel: Part 15: Breakfast Bar – Part C
I have made the drawers for the breakfast bar. The boxes for the drawers are constructed in the same manner as the drawers in the rest of the kitchen. The...
Kitchen Remodel: Part 15: Breakfast Bar – Part B
I have built the bar top of the breakfast bar. It is made from khaya, a type of mahogany. The design idea for the bar is that the top surface...
Kitchen Remodel: Part 15: Breakfast Bar – Part A
I am finally getting back to the kitchen build - the last thing to finish is the breakfast bar. I had the support for the back splash behind the stove made...
Kitchen Remodel: Part 14 – Final Wrap Up
Instead of waiting until every last end is tied up on the kitchen project, I decided I would show it off and do a final wrap up. I figured if I...
Kitchen Remodel: Part 13 – Open Shelves
Instead of upper cabinets, I built two open shelves along the north wall of the kitchen. I used 1.5 inch thick bamboo plywood for the shelves. I wanted the shelves...
Kitchen Remodel: Part 12 – Bamboo Door and Drawer Fronts
I have made the door and drawer fronts to the kitchen cabinets from 3/4 inch bamboo plywood. One big advantage to this is that I did not need to cover the...
MOST COMMENTED
Making Drawers
I would like to build drawers that will go on the shelves above the jointer in the shop. This is where I...
