Kitchen Remodel: Part 11 – Stove and Countertops
It was time to put the stove into position in the kitchen. The stove had been stored in the living room on a cart that I had made for it. ...
Kitchen Remodel: Part 10 – Sink
I built the cabinet for the sink wider than necessary thinking I would need some adjustability in the placement of the sink. This ended up making a lot more work than...
Kitchen Remodel: Part 9 – Windows
The kitchen windows were in need of repair. One of the two windows had a crack running through the glass and the glazing was falling out of both windows. I removed...
Kitchen Remodel: Part 8 – Cabinet Install
There was a lot more fitting and fussing with the cabinets to get them into place then I had originally thought. For the most part, these issues were all things I...
Kitchen Remodel: Part 7 – Plastering and Painting
I had to repair the kitchen walls to get ready for the cabinets. I started by patching the holes in the walls There was one big patch and several smaller...
Kitchen Remodel: Part 6 – Cabinet Tops
I have made a frame for the tops of the cabinets out of 3/4 inch birch plywood. This frame will help hold the various cabinets together as well and hold the...
Kitchen Remodel: Part 5 – Drawers
I made the cabinet drawers from half inch birch plywood. I made the side pieces from some of the scraps leftover from the cabinets and two new sheets of plywood. ...
Motorized Stop Motion Dolly
I have made a motorized stop motion dolly. I finally found a very slow electric motor. It rotates at 3.5 revolutions per minute. I cobbled together the track, dolly and...
Kitchen Remodel: Part 4 – Cabinet Carcass
I made the cabinet carcass from maple veneer plywood. I made the bottom pieces first to make sure they fit in the kitchen. The bottoms that are under the...
Kitchen Remodel: Part 3 – All About That Base
I made the cabinet bases from salvaged pieces of the original kitchen. The bases will house some plumbing and electrical. I held the various sections of the base in...
MOST COMMENTED
Walnut and Birch Bowl
I turned a walnut bowl with a segmented rim. I wanted to have the dark color of the bowl mix with...
