Frank makes

It was time to put the stove into position in the kitchen. The stove had been stored in the living room...

I built the cabinet for the sink wider than necessary thinking I would need some adjustability in the placement of the sink....

The kitchen windows were in need of repair. One of the two windows had a crack running through the glass and the...

There was a lot more fitting and fussing with the cabinets to get them into place then I had originally thought. ...

I had to repair the kitchen walls to get ready for the cabinets. I started by patching the holes in the...

I have made a frame for the tops of the cabinets out of 3/4 inch birch plywood. This frame will help...

I made the cabinet drawers from half inch birch plywood. I made the side pieces from some of the scraps leftover...

I have made a motorized stop motion dolly. I finally found a very slow electric motor. It rotates at 3.5 revolutions...

I made the cabinet carcass from maple veneer plywood. I made the bottom pieces first to make sure they fit in...

I made the cabinet bases from salvaged pieces of the original kitchen. The bases will house some plumbing and electrical. ...

We have a temporary kitchen set up in an adjacent room to the kitchen. We are using the old changing table...

The first real phase of the kitchen remodel is removing the old kitchen. This should have taken a day but took...

I felt the need to build a movable cart or dolly for our new stove, as we would not be ready to...

We have been thinking about remodeling our kitchen ever since we moved into this house 5 years ago. Over the past...

This is a commissioned bowl for a birthday present for the wife of a friend of mine. Her name is Leslie...

A year ago I liberated some maple wood from a firewood stash. I turned it into several bowl roughs. Now...

The rough turned maple bowl that I wanted to finish next had cracked. The crack was at an angle to vertical...

I turned a walnut bowl with a segmented rim. I wanted to have the dark color of the bowl mix with...

In this video, I wood turn a large piece of port orford cedar into an outdoor stool. I had trouble cutting...

My dad reintroduced my kids and I to a toy he had had when he was a boy. It has a...